Publications
“Neutron Pair Distribution Function Study of Two-Line Ferrihydrite”, Environmental Science & Technology, vol. 45, no. 23, pp. 9883-9890, 2011.
, “Ni cycling in mangrove sediments from New Caledonia”, Geochimica et Cosmochimica Acta, vol. 169, pp. 82 - 98, 2015.
, “The non-oxidative dissolution of galena nanocrystals: Insights into mineral dissolution rates as a function of grain size, shape, and aggregation state”, Geochimica et Cosmochimica Acta, vol. 72, pp. 5984-5996, 2008.
, “Observations and assessment of iron oxide and green rust nanoparticles in metal-polluted mine drainage within a steep redox gradient”, Environmental Chemistry, vol. 11, no. 4, p. 377, 2014.
, “Occurrence and formation of incidental metallic Cu and CuS nanoparticles in organic-rich contaminated surface soils in Timmins, Ontario”, Environmental Science: Nano, vol. 6, no. 1, pp. 163 - 179, 2019.
, “One Hundred Mineralogical Questions Impacting the Future of the Earth, Planetary and Environmental Sciences”, Elements, vol. 9, pp. 168-170, 2013.
, “Opportunities and challenges for nanotechnology in the agri-tech revolution”, Nature Nanotechnology, vol. 14, no. 6, pp. 517 - 522, 2019.
, “Optimizing carbon nanotube-reinforced polysulfone ultrafiltration membranes through carboxylic acid functionalization”, Journal of Membrane Science, vol. 447, pp. 395 - 402, 2013.
, “Ordered ferrimagnetic form of ferrihydrite reveals links among structure, composition, and magnetism”, Proceedings of the National Academy of Sciences, vol. 107, no. 7, pp. 2787 - 2792, 2010.
, “Outdoor urban nanomaterials: The emergence of a new, integrated, and critical field of study”, Science of The Total EnvironmentScience of The Total Environment, vol. 557, pp. 740-753, 2016.
, “Oxidation of C60 Aerosols by Atmospherically Relevant Levels of O3”, Environmental Science & Technology, vol. 48, no. 5, pp. 2706 - 2714, 2014.
, “PAH Sorption to Nanoplastics and the Trojan Horse Effect as Drivers of Mitochondrial Toxicity and PAH Localization in Zebrafish”, Frontiers in Environmental Science, vol. 8, 2020.
, “Paradox of Stability of Nanoparticles at Very Low Ionic Strength”, Langmuir, vol. 28, no. 30, pp. 11032 - 11041, 2012.
, “Parameter Identifiability in Application of Soft Particle Electrokinetic Theory To Determine Polymer and Polyelectrolyte Coating Thicknesses on Colloids”, Langmuir, vol. 28, no. 28, pp. 10334 - 10347, 2012.
, “Parental dietary seleno-L-methionine exposure and resultant offspring developmental toxicity”, Aquatic Toxicology, vol. 170, pp. 187 - 198, 2016.
, “Partial Oxidation (“Aging”) and Surface Modification Decrease the Toxicity of Nanosized Zerovalent Iron”, Environmental Science & Technology, vol. 43, no. 1, pp. 195 - 200, 2009.
, “Particle Size Distribution, Concentration, and Magnetic Attraction Affect Transport of Polymer-Modified Fe0 Nanoparticles in Sand Columns”, Environmental Science & Technology, vol. 43, pp. 5079-5085, 2009.
, “Partitioning of uranyl between ferrihydrite and humic substances at acidic and circum-neutral pH”, Geochimica et Cosmochimica Acta, vol. 215, pp. 122 - 140, 2017.
, “Pb, Cu, and Zn distributions at humic acid-coated metal-oxide surfaces”, Geochimica et Cosmochimica ActaGeochimica et Cosmochimica Acta, vol. 188, pp. 407-423, 2016.
, “PCBs and PCDD/Fs in soil from informal e-waste recycling sites and open dumpsites in India: Levels, congener profiles and health risk assessment”, Science of The Total EnvironmentScience of The Total Environment, vol. 621, pp. 930-938, 2018.
, “PCE dissolution and simultaneous dechlorination by nanoscale zero-valent iron particles in a DNAPL source zone”, J. Contam. Hydrol., vol. In Press, 2011.
, “PCE dissolution and simultaneous dechlorination by nanoscale zero-valent iron particles in a DNAPL source zone”, Journal of Contaminant Hydrology, vol. 131, no. 1-4, pp. 9 - 28, 2012.
, “Persistence of copper-based nanoparticle-containing foliar sprays in Lactuca sativa (lettuce) characterized by spICP-MS”, Journal of Nanoparticle Research, vol. 21, no. 174, 2019.
, “Phenotypic Characterization of Transgenic Japanese Medaka (Oryzias latipes) That Express a Red Fluorescent Protein in Hepatocytes”, Toxicologic Pathology, 2013.
, “Photochemical transformations of thiolated polyethylene glycol coatings on gold nanoparticles”, Environmental Science-NanoEnvironmental Science-NanoEnvironmental Science-Nano, vol. 3, pp. 1090-1102, 2016.
, “Photoluminescence from Inner Walls in Double-Walled Carbon Nanotubes: Some Do, Some Do Not”, Nano Lett., vol. 11, pp. 4405-4410, 2011.
, “pH-Triggered Molecular Alignment for Reproducible SERS Detection via an AuNP/Nanocellulose Platform”, Scientific Reports, vol. 5, p. 18131, 2015.
, “Physico-chemical Control over the Single- or Double-Wall Structure of Aluminogermanate Imogolite-like Nanotubes”, Journal of the American Chemical Society, vol. 134, no. 8, pp. 3780 - 3786, 2012.
, “Phytoavailability of silver at predicted environmental concentrations: does the initial ionic or nanoparticulate form matter?”, Environmental Science: Nano, vol. 6, no. 1, pp. 127 - 135, 2018.
, “Phytotoxicity of soluble graphitic nanofibers to model plant species”, Environmental Toxicology and ChemistryEnvironmental Toxicology and Chemistry, vol. 35, no. 12, pp. 2941-2947, 2016.
, “Plasmonic colorimetric and SERS sensors for environmental analysis”, Environ. Sci.: Nano, vol. 2, no. 2, pp. 120 - 135, 2015.
, “Plasmonic Electronic Raman Scattering as Internal Standard for Spatial and Temporal Calibration in Quantitative”, The Journal of Physical Chemistry Letters, vol. 11, no. 22, pp. 9543 - 9551, 2020.
, “Polycrystallinity of green rust minerals and their synthetic analogs: Implications for particle formation and reactivity in complex systems”, American Mineralogist, vol. 100, no. 10, pp. 2091 - 2105, 2015.
, “Polyelectrolyte and Silver Nanoparticle Modification of Microfiltration Membranes To Mitigate Organic and Bacterial Fouling”, Environmental Science & Technology, vol. 46, no. 7, pp. 4025 - 4033, 2012.
, “Polymeric Coatings on Silver Nanoparticles Hinder Autoaggregation but Enhance Attachment to Uncoated Surfaces”, Langmuir, vol. 28, no. 9, pp. 4178 - 4186, 2012.
, “Polymeric Membranes from Colloidal Templates with Tunable Morphology”, Macromolecular Reaction Engineering, vol. 4, pp. 445-452, 2010.
, “Polymer-modified Fe0 nanoparticles target entrapped NAPL in two dimensional porous media: effect of particle concentration, NAPL saturation, and injection strategy”, Environmental Science and Technology, vol. 45, pp. 6102-6109, 2011.
, “Precipitation of Mercuric Sulfide Nanoparticles in NOM-Containing Water: Implications for the Natural Environment”, Environmental Science & Technology, vol. 43, pp. 2368-2373, 2009.
, “Precipitation of nanoscale mercuric sulfides in the presence of natural organic matter: Structural properties, aggregation, and biotransformation”, Geochimica et Cosmochimica Acta, vol. 133, pp. 204 - 215, 2014.
, “Preparation and characterization of fouling-resistant photocatalytic”, Water Science and Technology, vol. 62, pp. 963-971, 2010.
, “Preparation and evaluation of nanocellulose–gold nanoparticle nanocomposites for SERS applications”, The Analyst, vol. 140, no. 16, pp. 5640 - 5649, 2015.
, “Preparation of regenerable granular carbon nanotubes by a simple heating-filtration method for efficient removal of typical pharmaceuticals”, Chemical Engineering JournalChemical Engineering Journal, vol. 294, pp. 353-361, 2016.
, “Preparation of ultrafine magnetic biochar and activated carbon for pharmaceutical adsorption and subsequent degradation by ball milling”, Journal of Hazardous MaterialsJournal of Hazardous MaterialsJournal of Hazardous Materials, vol. 305, pp. 156-163, 2016.
, “Press or pulse exposures determine the environmental fate of cerium nanoparticles in stream mesocosms”, Environmental Toxicology and Chemistry, vol. 35, no. 5, pp. 1213–1223, 2016.
, “Probing Ag nanoparticle surface oxidation in contact with (in)organics: an X-ray scattering and fluorescence yield approach”, Journal of Synchrotron Radiation, vol. 18, pp. 871-878, 2011.
, “Progress towards standardized and validated characterizations for measuring physicochemical properties of manufactured nanomaterials relevant to nano health and safety risks”, NanoImpactNanoImpact, vol. 9, pp. 14-30, 2018.
, “Properties of impurity-bearing ferrihydrite I. Effects of Al content and precipitation rate on the structure of 2-line ferrihydrite”, Geochimica et Cosmochimica Acta, vol. 92, pp. 275 - 291, 2012.
, “Properties of impurity-bearing ferrihydrite II: Insights into the surface structure and composition of pure, Al- and Si-bearing ferrihydrite from Zn(II) sorption experiments and Zn K-edge X-ray absorption spectroscopy”, Geochimica et Cosmochimica Acta, vol. 119, pp. 46 - 60, 2013.
, “Properties of impurity-bearing ferrihydrite III. Effects of Si on the structure of 2-line ferrihydrite”, Geochimica et Cosmochimica Acta, vol. 133, pp. 168 - 185, 2014.
, “Protein coating composition targets nanoparticles to leaf stomata and trichomes”, Nanoscale, vol. 12, no. 6, pp. 3630 - 3636, 2020.
,